|
|
 |
|
|
 |
|
PNEU-MAP A posture gauge designed to graphically replicate the
curve of the spine. The patient stands in front of the Pneu-MAP, a small wheel rolls down the back duplicating on a grid the
spinal curve. Points on the grid entered into an Analysis Program translate the curve to a printout graph that compares the
Mapped spinal curve to the normal curve. The printout includes exercise protocols for helping to correct deviations from the
normal curve.
|

|
|
 |
|
|

|
PNEU-BACK CHAIR-A pneumatic
resistance exercise chair that restricts the use of stomach and leg muscles. The patient sits on the chair, at the direction
of the clinician who is guided by the Pneu-MAP protocols, and pushes back in small controlled exercises. These little pushes
train the muscles along the spine making them stronger and able to support the body the way it was designed. The result of
this exercising can literally pull the spine into the correct posture.
|
|
 |
|
PNEU-WEIGHT An offloading device with one, two or three stations
that allow the patient to perform low-impact kinetic exercises in an upright functional position. The space under each
station is wide enough give you the option to incorporate different pieces of equipment such as the Pneu-Back Chair, a treadmill,
stationary bike, stair-stepper etc... A feature only on the Pneu-Weight is the balance mode, if a patient were to lose their
balance; their body would be supported and will only be let down about six inches, thus avoiding re-injury resulting from
a fall. Activities such as walking, running, stair climbing, jumping and balance may all be performed safely in an unweighted
condition with 360° range and a 300 lb lift.
|
|
|
|
|
|
|
|
|
| |
|
|
Min
|
Max
|
|
|
|
|
|
8' 8"
|
|
4' 2"
|
300 lbs
|
3' 6"
|
|
|
|
|
|
|
|
|
|
|
|
|
|
6' 4"
|
300 lbs
|
3' 6"
|
|
|
|
|
|
|
|
|
|
|
|
8' 8"
|
|
8' 8.5"
|
300 lbs
|
3' 6"
|
|
|
 |
|
|

|
PNEU-VIBE-A vibrating platform with a wide non-skid surface. All
Pneumex vibration platforms have a speed range of 10 -60 Hz. The larger platform Pneu-Vibe Pro has a 1200 lb capacity and
is sturdy enough to accommodate jumping and weight training. The Pneu-Vibe Club has handle bars to help steady persons with
balance problems and a 400 lb capacity. Users of all ages, weight, and condition are able to use the Pneu-Vibe platforms to
achieve greater results than ever before. People are reporting that vibration exercise and rehab protocols are aiding them
with issues ranging from arthritis all the way to competitive athlete strength gains and increased metabolism.
|
|
|
PNEU-VEST comes in three versions each designed for a specific
use, but all sharing the same capabilities for gait correction and worry free unweighted activities. This harness fits the
patient like a snug vest with a strap positioned on the buttocks. It allows the patient to exercise in an upright, controlled
and safe position. Effectively griping the body to support part of the patients weight. We find it is more comfortable, allows
for a more normal rib and diaphragm interaction, stays in place better. Unisex design fits both male and female equally well,
and elastic gait straps can be attached to the legs to assist in gait correction.
|
|
|
|
|
Pneu-Vest Vectors This version of the Pneu-Vest is our standard vest we
send this one out with all Pneu-Weights. It has a strapping system on the back that allows us to position lumbar straps to
maximize or minimize lumbar lordosis and un-weight left or right SI.
|
|

|
Pneu-Vest Scoliosis The design of the Pneu-Scoliosis Vest allows us to
be considerably more aggressive and effective in working with scoliosis patients. It gives us the ability to utilize specific
vertebral level lateral forces (right or left) in conjunction with our scoliosis program.
|
|

|
Pneu-Vest Sport The same design as the vectors without the adjustable back
strapping feature. Persons doing fitness or sports training find this to be the vest of choice.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| |
|
|
|
Medium
|
32" to 44"
|
Blue
|
| |
|
|
|
Large
|
44" to 55"
|
Yellow
|
| |
|
|
|
X Large
|
55" to > 67"
|
Purple
|
| |
|
|
| |
|
|
|
All Pneumex equipment
presently in production and items in development were designed by Gerry Cook, Engineer and owner. Specifications
are generated on a computer generated mechanical design program. These drawings are sent to the machine fabricators and the steel is fabricated according to the exact specifications
in the drawings. The fabricated steel is quality checked before leaving the machine facility. The fabricated steel is sent to powder coating, where it is sandblasted, then electrolstaticly
coated with Titanium Dioxide and Silica, amorphous, then cured at 400º for 20 to 30 minutes. The machined and coated pieces are assembled at our
facility in Sandpoint, Idaho into designated equipment. Each piece of finished equipment is tested
before it leaves the assembly area. The finished equipment is cleaned and then transferred
to the packing area where the equipment is re-tested,and
checked for overall appearance and function; if for any reason the equipment does not perform as intended it is returned to
assembly for adjustment. The
tested equipment is broken down into components for shipping. Each component is carefully wrapped and placed
in shipping cartons. The carton content is checked against a packing list to assure that each carton contains the correct
parts. The outside of the carton has a packing list (with a check off list of each item packed) and the
serial number of the equipment inside.
|
|
Copyright 1998 Pneumex, Inc. All
Rights Reserverd 800.447.5792
|
|
|
 |